Posted on Leave a comment

5 Things Every Parent Should Do Before Schools Reopen

For months, parents around the world have been quarantining with their children to protect their families from COVID-19. But, now, as the numbers of new cases go down and the virus’s peak has passed, there’s talk of schools reopening.

So far, the news tells us schools will open in September. And if this makes you feel uneasy or concerned about your children’s wellbeing, you’re not alone. But, worry alone will not help. The question we must ask is, what steps can parents take to protect their children at school?

Wearing a mask

It isn’t enough to put a mask on your child and send them to school. Often things that seem simple to adults are difficult for children to understand. A child may take off a mask because they’re uncomfortable or because their nose was itchy.

Many parents are hoping cartoon masks will appeal to their children. But what is stopping your child from swapping their Tom and Jerry mask for another child’s Ben 10 one? If you want to keep your child safe, you need to talk to them. Explain to them why masks matter so much.

Social distancing

The term of 2020 is social distancing. Children understand things in context, so your child may wash their hands at home, but they aren’t used to social distancing at school. The chances are without the proper discussion, they’ll go back to what they usually do at school. You need to tell them why they can’t hug their friends, swap toys, or share lunch boxes and water bottles. Because it only takes two kids drinking from the same bottle to put your family at risk.

Washable backpacks

Once schools open, every family will have to develop a routine to disinfect daily. Some normal steps include changing clothes and shoes, showering, and separating the “outside” items from the “inside” things. You may want to set up a room or washroom for this purpose. That way, minimal germs enter the house.

One step parents can take to make the process easier is to get washable cloth backpacks. We know by now that the virus can stick to any surface. So, if an infected person touches, sneezes, or coughs on your child’s backpack, they can bring the virus home. Getting washable bags makes it easy to wash and disinfect bags regularly.

Packed lunches

It’s easy to rely on school lunches, but you don’t know who is making them. There’s always some level of risk with outside food. Try to send your child to school with a packed lunch. Make sure they have a spoon and fork, and a water bottle. And that they don’t take anything from anyone else.

Question the school

Schools are required to take steps to protect students before they can open. As a responsible parent, you can ask your child’s teacher how many students per classroom, the distance between desks, steps for social distancing, and mask policies. Also, inquire about any new learning methods since most schools will try a ‘blended learning’ approach that combines classroom teaching with home learning.


Coronavirus is the new reality that we have to live with…and rather embrace. On the opening of schools, schools and parents should partner to develop a better strategy to prevent the spread of virus.

Posted on Leave a comment

How Is Melt-Blown Used To Make Masks And The National Technical Standard Of Masks


The melt-blown process is a term that’s seeing an increasing amount of research these days. What was once an obscure fabric is now one of the most in-demand materials in the world.

Melt-blow extrusion is the full name of the manufacturing process. It creates a type of fabric that falls under the category of non-woven fabric that’s made of polymers. These polymers are known as polypropylene.

Traditional fabrics are often made using natural materials like silk or cotton that are woven together. Non-woven fabrics, in this case, melt-blown fabric, are thermally bound together material created from individual fibers of molten polymers. The end result is a fabric that has a web-like structure, and it becomes desirable for a number of reasons. These are absorbency, bacterial protection, cushioning, resilience, softness, and sterility. They’re also washable as well.

Given the different numbers of features they offer, there are a number of diverse products that can be made using the melt-blown fabric. These include filters, face masks, medical masks, and surgical masks as well. The versatility of the cloth means that it’s used to produce many different products. However, because of the COVID-19 pandemic, the main use of melt-blown fabric is now in the production of masks. If you’re looking to learn more about how the melt-brown process is used to make face masks, then keep on reading!

How Is Melt-Blown Fabric Made?

Melt-blown fabric is created through a process which is known as melt-blown extrusion. It is a single-step process that involves a stream of high-velocity air, that blows molten thermoplastic resin from extruder tip. The resulting material goes onto a conveyor or a take-up screen. It’s a process that’s been around since 1950 and has never been more important until today.

There are four basic components of the process; these are the resin feed system, extruder assembly, metering pump, melt-blown die assembly, collector, and the winder unit.

Resin Feed System

Thermoplastic resin is the main raw material for the melt-blown process. There are several different polymers that are adaptable for use in the melt-blown extrusion process. The different polymers include; Polypropylene, Polycarbonate, Polybutylene terephthalate, and Polyamide, among others.

Extruder Assembly

Raw material from the resin feed system is fed into the extruder assembly. There are three different zones in the assembly. These are the feed zone, transition zone, and metering zone. The feed zone is where material enters the extruder and begins to melt.

In the transition zone, the polymer is homogenized and compressed. Once the polymer enters the molten state, it’s fed into the metering zone. The pressure increases as the material are getting ready for discharge through the melt-blown die assembly.

Metering Pump

The molten polymer output enters the metering pump pressurized and, at a temperature of 250-300C, enters the metering pump. This pump is designed to deliver clean polymer mix to the die assembly at a constant volume.

It’s a sophisticated piece of machinery that accounts for variations in pressure, temperature, and viscosity. After the metering pump, the resulting output is feed into the die assembly.

Melt-Blown Die Assembly

The die assembly contains three key components; the feed distribution, die nosepiece, and the air manifolds. An absolutely critical component is the die nosepiece. It impacts the uniformity of the web of melt-blown fabric coming out of the machine. The air manifolds then supply high-velocity hot air to the extruded fibers.


The high-velocity hot air causes the polymer to turn into microfibers. These microfibers have a diameter that ranges from 0.1 to 15 microns.

Winder Unit

The last step of the process is the winder unit, where the fabric from the collector is wound onto a cardboard core.

Now that you’ve learned how the material is made, we can move on to how you manufacture the masks.

How Is Melt-Blown Fabric Used To Make Masks?

The non-woven melt-brown fabric is the primary material used in the production of medical masks and surgical masks. Medical Masks are typically produced by stacking together three layers of non-woven material. The inner layer, which comes in contact with the wearer’s face, absorbs any moisture.

While the outer layer of non-woven fabric is a waterproof barrier that stops any liquids, the patient spills out. In between the inner layer and the outer layer is the middle layer that serves as a filter. This middle layer is where the melt-blown fabric comes into action.

Additionally, for face masks that meet technical standards, they also get electret treatment. The process adds electrostatic properties to the filter, which enables the electrostatic absorption, which helps trap aerosolized particles through electrostatic attraction.

The mask-making process follows seven basic process steps; these are the same for surgical masks and medical masks. All the steps in the process are as follows;

  • The machine combines three layers of materials together to produce the three-layer face masks. It’s initially a large piece of fabric that needs to go through the cooking process.
  • Attach a metal nose strip. The machine has to stitch the metal wire into the melt-blown fabric face masks. These metal strips are crucial for masks as they allow the wearer to bend the mask to fit around their nose.
  • Add the necessary folds and pleats. Once again, the machine will use a folding device that adds all the requirements. It allows companies to adjust the standard mask to fit all the different wearers.
  • Cutting and stitching. The next step in the process is cutting the large piece of three-material fabric to individual size masks. After the cutting process, you can stitch the melt-blown fabric to join all the layers.
  • Attach Ear Loops. These are crucial as they need to stick to the mask properly. To ensure they stick, the adhesive makes use of a thermal press. Alternatively, companies can make use of ultrasonic welding.
  • Disinfect properly. If face masks need to meet the technical standard, they must be subjected to a sterilization process. After this treatment, the mask needs to stay in isolation for seven days until the ethylene oxide dissipates.
  • This is the final step in the process, and it involves simply packaging the completed masks for shipment.

In the case of N95 respirators, the process is slightly different and involves the use of a polyester shell and cover web. The key in all the masks is the melt-blown fabric filtration layer.

Due to the dense structure of the fabric, it helps ensure that the smallest particles are filtered out at high efficiency. It’s because of these characteristics that the fabric is crucial for filtering viruses and any other pathogens.

Currently, the worldwide demand for face masks that meet a technical standard is very high. It is currently greatly outweighing the supply. Even though companies are trying to switch towards face mask production, there’s still a need for a greater focus on producing more medical masks. Now that you know more about how these masks are produced, you’ll also want to know the technical standard for masks in different countries.

United States

ASTM International is providing no-cost public access to important ASTM standards that are used in the production and testing of masks. These included several test specifications that analyze different features of the mask.

 The tests include an efficiency test of materials used, bacterial filtration efficiency, and standard specifications for the performance of materials used in the mask. However, most of these specifications apply to the high-quality masks that are available in the market.

The CDC recommends that the general public should not use these masks, and should restrict themselves to using standard cloth face masks. These generally don’t need to meet any standard requirements except the standard terminology specifications of protective clothing.


China formulated these following standards for medical face masks: GB19082-2009 technical requirements for single-use protective clothing. The other standards deal more directly with medical face masks.

These are the GB19083-2010 technical requirements, YY/T0969-2013 single-use medical face mask, and YY0469-2011 surgical masks. China is also currently in the midst of updating its technical standards for the masks. They’ve also included a new designation for masks specifically designed for children.

Medical masks also regulated under the category of Class II medical device in China. According to the government’s guidelines, a manufacturing enterprise needs to obtain production licenses issued by a provincial drug regulatory department before production.


The European Committee for standardizations and the European Committee for electrotechnical standardization came together to come up with 14 technical standards that apply to medical masks. They’re hoping the actions will help both EU companies and third-country companies to adhere to a minimum standard of production.

11 of the standards developed have been worked on by CEN while three additional ones are developed jointly with ISO. All these standards are also available for free for public access.


There’s a massive demand for high-quality medical masks given the current climate. The demand is only going to increase as more and more countries encourage their populations to wear masks.


As manufacturers try to operate at optimum capacity to produce as many masks as possible, it’s important that they adhere to international standards as well. Each country has its own specification, but they generally tend to follow the same guidelines!

Posted on Leave a comment

World’s Top 5 N95 Manufacturers and Where to Buy in 2020

3M masks

N95 respirators, surgical, and cloth masks are in high demand. Ever since the pandemic spread, the mask market has reached a staggering $8.1 billion worth. That’s $8 billion more than the year before.

The respiratory infection-based epidemic has boosted demand for N95 respirators among medical workers, nurses, and healthcare practitioners. But, with such a high risk on the job, many people in the medical industry want the best possible N95 respirator they can get.

They have to be manufactured with the highest standards and come from reputable companies. But, the question is, where can you buy these kinds of masks in 2020. Which manufacturers stand out from the rest?

Best 5 N95 Manufacturers You Can Buy From


When Corona spread, China covered the regional mask market. They were the biggest cloth, surgical masks, and N95 manufacturers around the globe. But, the massive widespread of the infection, made it almost impossible to keep up with demand.

That’s why countless masks manufacturers from other countries joined the effort. Now, the

 production rates have increased almost 12-fold, and people can easily get a mask. With the help of companies such as these, masks are now available to everyone.

Here are some of the most well-known companies you can buy an N95 respirator from.

3M Mask Manufacturer

3M is a multinational conglomerate in the U.S. that operates in consumer goods, healthcare products, and worker safety. According to the CDC, it is the biggest N95 respirator seller on the globe. They produce top-quality masks people can rely on.

Click me to purchase 3M masks.

3M masks

Kimberly-Clark Corp

You might not familia with Kimberly-Clark Corp., but you must know SCOTT, HUGGIES, ANDREX. Kimberly-Clark is a reputable hygiene and health company situated in the U.S. They sell products from towels to diapers, surgical equipment, and facial coverings. They distribute in countries all around the globe and are key manufacturers in the industry. 

Click me to purchase PEE from Kimberly-Clark.

Prestige Ameritech

Founded in 2014, this company has managed to secure the mask supply in the states and around the globe. They produce respirators and surgical facial coverings. While the company only serves customers in the U.S., their top-quality products can be found on other websites that can cover a much bigger market.

Click me to purchase ProGear Masks.

Moldex-Metric, Inc.

Moldex is one of the most well-known N95 Manufacturers on the market. With a huge range of different products and designs, it’s a great place to buy all sorts of filters. They cover a massive portion of the face mask market and for a good reason. Their versatility and convenience make them a great choice.

Click me to purchase Moldex-Metric.

Luis M. Gerson Co. Inc.

With a massive market and a huge collection of medical supplies, this company deserves a spot on our list. They produce respiratory, facial coverings, filters, spray socks, bags, and more. The company is currently situated in both China and the United States. They are certified manufacturers for respiratory equipment, which makes them an excellent choice for those looking to protect themselves.

Click me to purchase their N95 masks.

Posted on Leave a comment

What Is Plexiglass and Why Do You Need It?

Also called acrylic, by definition, Plexiglass is a petroleum-based thermoplastic. For industry heads, plexiglass can be referred to as PMMA. It is constructed from polymethyl methacrylate via a specially monitored manufacturing process. The polymethyl methacrylate — a monomer — reacts with a catalyst before it is crafted into flat sheets.

Plexiglass is shatter-resistant. Furthermore, it’s lightweight and, when compared to glass, is cheaper. With these unique characteristics, Plexiglass has found usage in different niches. For starters, it has found application in aquariums can be used as a sound barrier, a component for display cases, picture frames, and brochure holders.

Primarily, Plexiglass has been used in hospitals and other medical establishments. This is due in no small part to its resistance to wear and tear. Furthermore, it’s easy to clean and won’t get damaged during the cleaning process.

More recently, with the current COVID-19 climate, Plexiglass has found relevance as a piece of protective equipment. Many organizations in different niches are using these functional, resistant sheets as social distancing partitions where applicable.

This means they can be used between office desks in co-working spaces. Also, they can be used to partition sinks in bathrooms, restaurant booths and more. Plexiglass has even found application in fashion niches. For instance, nail salons are using it to separate customers and employees. Even the movie theatres are using Plexiglass to separate seats, ensuring that social distancing rules are followed and guaranteeing customer safety.

Thin, flat, and transparent, Plexiglass offers protection from nose and mouth droplets. More importantly, this material can do this without a significant trade-off in aesthetics and user accessibility.

Plexiglass — The Key Features

Here’s why Plexiglass material is highly recommended for companies that are looking to ensure customer and employee safety in the current climate.


Plexiglass is lightweight. This means it can be installed on most surfaces without worries about overloading the structure.

Impact Resistance

Can resist breakage and possible damage — even with errant customers and cleaners.

Easy To Mold

Plexiglass can be molded and bent into different shapes based on the unique need. More importantly, this shape altering process can be done industrially or by hand.

Different Colors

Depending on the aesthetic needs, Plexiglass can be dyed to different shades.

Custom Sizes

Sheets can be cut to fit different building, design, and safety needs.

Quick Installation

Installation is easy and seamless.

How to Clean Plexiglass

With the stringent health and safety requirements needed for businesses to open, it’s a plus that maintaining Plexiglass is an easy job. Unlike glass, Plexiglass can take more of a beating during the cleaning process. Additionally, it can be easily uninstalled, subjected to a thorough cleaning process, and then re-installed.

The cleaning process for Plexiglass starts with getting rid of dust and debris on the surface. This can be quickly done with a hairdryer or related equipment. However, take special care to set the dryer to the coldest setting. Hot air and Plexiglass do not mix.

Take care to remove every foreign particle before the next cleaning step. Scrubbing dirty Plexiglas with a microfiber cloth will only scratch the glass, reducing the aesthetic value.

For proper disinfection and maximum safety, the next step involves cleaning with a solution of genetic dish soap and water. Simply angle the sheet of Plexiglass at an angle of 45 degrees and pour the solution over it.

Alternatively, the Plexiglass can be sprayed with the solution. After spraying, give time for the solution to run down the length of the glass. Once this is done, wipe the Plexiglass with a clean microfiber cloth. Avoid using products that have ammonia, polish, or acetone on Plexiglass.

Posted on Leave a comment

COVID-19 in Children: Can My Child Get Infected? How Do I Keep Them Safe?

With over 11.8 million cases recorded, the pandemic continues to spread. With schools getting closed and playdates reduced to a minimum, parents are now terrified about their children’s health and well-being. The virus has taken a toll on children’s lives, ruining their day-to-day routines.

Parents are uncertain if a child will have the exact same symptoms as an adult, or the infection poses a more serious threat. Here, we will answer all your questions for you to help you get properly prepared.

What Are the Odds of a Child Getting Infected with COVID-19?

According to the United Kingdom National Health Service, anyone can get infected with COVID-19, including children. But, it seems that the virus is less prevalent in the younger generation, while more present in adults and the elderly.

Based on clinical reports, out of 150,000 COVID-19 cases in the U.S., only around 2,500 were registered in children. That’s about 1.7% of the infected. Similar reports have been shown in different regions and countries, especially Italy and China, where the outbreak has left a major impact.

Despite the countless recorded cases around the globe, not that many children have lost their lives due to COVID-19. While every child is capable of getting infected, they are not as prone to diseases as the older population. They also have less chance to contract something as severe as the coronavirus.

The reason for that is the body structure and the number of antibodies. Since children get sick with the flu often, their body produces more antibodies and a lot quicker. The antibodies don’t overreact with the virus and tend to remove the pathogens much faster.

What About Children With Diabetes?

Unfortunately, any person with an underlying medical condition, like diabetes, is more vulnerable to the disease. If a child already has diabetes, they are at high risk of contracting the coronavirus.

The same thing applies to children with cardiovascular diseases, genetic illnesses, and poor immune system.

Are Toddlers At Risk of COVID-19?

COVID-19 in toddlers is very rare, but still possible. If they do get infected, the virus can be a serious problem for their overall health, particularly in babies younger than one year.

Toddlers are extremely vulnerable to diseases. Their immune system is underdeveloped, and their body has very tiny airways. If the infection were to cause breathing difficulties, like it’s the case with COVID-19, it could turn into a critical illness.

How to Protect Your Child from COVID-19?

Keeping your child safe from the virus should be a top priority. The CDC advises parents to do that by:

  • Teaching children proper hygiene
  • Inspiring them to wear a face mask
  • Encouraging them to play outdoors and stay socially active
  • Show them the importance of keeping a safe distance

What to Do If Your Child Gets Infected?

If you notice any flu-like symptoms, high temperature, or trouble breathing, get your child tested. If they test positive, seek medical help in the pediatric care unit immediately. Your doctor will provide your child with the supportive care they need, including medicine and treatment.

Posted on Leave a comment

How COVID-19 Affects Senior Citizens

In the past few months, the coronavirus has taken the world by storm. Though this virus isn’t the deadliest one to surface in the last few decades, its highly infectious nature means everyone must take social distancing precautions.


There’s a lot we don’t know about the virus. However, the most recent data shows that COVID-19 is dangerous for older adults. People above the age of 65 accounts for 73% of deaths in the US. On the other hand, people below the age of 18 only accounts for 0.06% of deaths.


What the link is between COVID-19 and old age, we can’t say for sure. However, we do know that the trend of the coronavirus affecting older people more than younger people is not limited to just the US.

Why Is COVID-19 Worse For Older People?

The primary reason COVID-19 is dangerous for older adults is that they have a range of underlying conditions, which make it more difficult for their bodies to effectively fight off the virus. The most common comorbidities in older people include conditions such as diabetes, blood pressure problems, and hypertension.


In addition, the older you are, the fatal coronavirus could be for you because of immunosenescence. This is the natural deterioration of the immune system that comes with old age. It makes it more difficult for the body to effectively combat the virus.

How To Protect Yourself And Your Loved Ones

Knowing that COVID-19 can be fatal for older adults makes COVID-19 old age protection necessary. Most of us have loved ones that are in their 50s, 60s, or even older. This means we need to ensure that they’re taking necessary safety precautions, and we ourselves are also taking precautions to keep them safe.


The CDC has a comprehensive guideline for older adults that you can check out. Ideally, you must ensure that older people have extremely limited social interaction. Keep them at home at all costs. If you need someone to go grab groceries, for example, send a younger member of the household.


Also, ensure that the older members of your household have plenty of access to sanitizers, tissues, soap, and anything else they may need. Even inside the home, keep your distance from older people to minimize any risk of infecting them.

Government Benefit Programs

The current pandemic is especially scary for senior citizens. Some of them live alone with their partners or in old age homes. At times like these, it’s easy to panic and loses hope, but don’t worry! As long as you take precautions, you can keep yourself safe from the virus.

In times of the coronavirus, old age security is more important than ever. Luckily governments all over the world offer senior citizen benefits that can ease some of the difficulties you may currently be facing. In the US, you can apply for the Nation Council on Aging’s Benefits for Seniors. Similarly, the government of Canada offers many programs for seniors too. As part of their COVID-19 Economic Response Plan, the government of Canada has also given pensioners an extra one-time payment of $300-500, on top of their pension.

Posted on Leave a comment

How Can UV Lamps Protect You In Daily Life

You’ve probably heard the term ‘UV light’ or ultraviolet light, but do you know what it is? UV light is essentially an invisible light that is all around us. Despite the fact that we can’t see it, it’s extremely beneficial for us.


In fact, UV radiation is often used to disinfect surfaces, reduce pollutants in waters, and is even used as an alternative to chemical solutions. Given this, it’s no surprise that the trend of having UV lamps is rising. If you’re thinking of getting one, it’s essential to know how UV lamps can protect you.


UV lamps can protect you through the UV light they emit. Here are some benefits of UV light you may not have known about.


Your body needs exposure to UV light in order to produce Vitamin D, which is used to build up immunity and is a crucial part of bone development. Thus, a UV lamp can help you maintain healthy bone density.


Vitamin D levels in the body have been directly linked to the production of serotonin as well. While we dont know much about serotonins role in the body, we do know that it causes feelings of happiness and well-being.


You dont have to worry about UV radiation harming you. Luckily, our skin has a special pigment, melanin, which protects us from UV radiation. Viruses and bacteria, however, have no protection against UV radiation, which is why UV light does an excellent job of eradicating them. 


UV light is just EM radiation with a specific wavelength, which means the smaller the wavelength, the stronger the radiation. Hence, UV lamps with different wavelengths are used for different purposes.

To make it easier, we divide UV light into three categories. UVA, UVB, and UVC, with UVC being the strongest and UVA being the weakest.


UVA is used in tanning beds because this light can trigger the production of melanin in your body – giving you a tanned look. UVA is also used for UV curing, which causes adhesives to bind quickly when UV rays are incident on them. UV rays speed up the process.


This is used for cleaning/sanitizing water. UVB is also used to treat skin diseases. Youll find one in your closest barbershop!


UVC is the strongest form of UV light. Therefore, it is often used to sanitize hospital floors and surgical tools.



The life of a UV lamp is considerably long, but it can be even longer if you take of it properly. Weve compiled a list of ways you can make your lamp last longer.


Like all things, UV lamps can collect dust and debris from the air. So, make sure that you clean your lamp once a month using a lint-free cloth soaked in Isopropyl alcohol (rubbing alcohol). Remember to always wear gloves!


Making sure that your UV lamp has the right temperature is extremely important. Place your UV lamp is a space with proper ventilation but also make sure it is not too cool.


So, youre probably wondering if UV lamps can kill viruses, can the lamps be used to fight Covid-19? Yes! Absolutely. UV light destroys the outer layer of the virus, killing it. Sadly, there are a few problems with commercially available UV lamps that make them only somewhat useful for this purpose. However, you can still wipe out the majority of the virus on most surfaces. Read about it more here.


Many people think that if UV light can kill viruses, it may be harmful to humans too. The answer isnt as simple as a yes or a no. If exposed to high-intensity UV rays, you can get sunburn or even skin cancer in rare cases.

With proper precautions, UV lamps are incredibly safe. Wearing full-sleeves shirts and full-length pants can save you from skin irritation. Remember to always wear UV-protection sunglasses or eye-gear when dealing with UV lamps.

Posted on Leave a comment

How Blockchain Technology Helps the Medical Supply Chain Against COVID-19?

The current COVID-19 pandemic has completely changed the dynamics of the world.

All industries are suffering from the complete shut down in regular business activity. The medical sector is no different, and the need for critical medical equipment like ventilators and personal protective equipment are crucial.

However, the pandemic is exposing the pharmaceutical sector’s inefficiency regarding sourcing these essential supplies. That’s where blockchain steps in and is a potential solution that can help fix the issues Healthcare supply chain faces.

What blockchain mostly does is provide medical suppliers with the ability to accurately and transparently track where every product has been. While several suppliers are popping up that are looking to give the industries the personal protective equipment they need, there are no existing ways that medical suppliers have to track and validify the material.

Given the sensitive nature of the world at this moment, the equipment must be high quality; however, with several new and unregulated suppliers popping up, that becomes an issue. There’s already a high incidence of countries reporting and confiscating counterfeit facemasks that don’t offer a sufficient amount of protection. A blockchain-based supply chain system would provide a transparent record of transactions that provide high accuracy and efficiency.

One of these companies that provide pharmaceutical companies with a blockchain framework for the supply chain is The structure is easy to build and allows the company to make use of specific blockchain applications that cater to each business case. Additionally, they also provide companies with a parallel chain network that enables data sharing across the different blockchain applications easily. All of these transactions are entirely safe and ensure that there’s no interference or tampering within the supply chain. Additionally, the easy to track nature means that the companies can follow products through each point in the supply chain.

SoothyGarden Product Validation

Soothy Garden Blockchain-based Product Validation System

Additionally, it allows medical suppliers like to carry out their business practices during these crucial times effectively. Due to their blockchain empowered healthcare supply chain, Soothy Garden can enable their consumers to check for product validation. This will showcase consumers the timeline of the delivery and the certificate of the manufacture and will let them confirm if their product is valid. It showcases the company is in charge of the lifecycle of every single one of their products, all the way from the source to the consumers.

The blockchain application system is incredibly useful for consumers as well, as it makes the process much safer for them. With so many individuals looking to order personal protective equipment, it’s entirely likely that they’re going to get counterfeit products. However, with the use of the product validation feature, consumers can easily track whatever products they offer—additionally, the WHO is wholly recommending that all healthcare providers incorporate blockchain into their supply chain.

While the coronavirus is a tragedy that’s affecting millions of people around the world, it isn’t going to stop the world from adapting and coming up with different solutions. In this current pandemic, healthcare providers must employ blockchain actions in their supply chain.


Posted on Leave a comment

Cloth face masks VS Medical Masks

Medical masks are originally intended to be used by medical practitioners when treating patients to prevent bacteria from droplets from the doctor’s or nurse’s mouth or nose to the patient. However, with the spread of COVID-19 all around the world, the general population, whether ill or not, are advised or even mandated in certain countries, to wear masks to protect themselves and others from the deadly epidemic.

Cloth face Mask vs. Medical Mask

Most people wear general masks made of cloth to cover their mouth and nose when going out during this epidemic, but is it that effective in blocking the virus from entering your system?

Verifiable research about the spread of the virus is still lacking since the spread of this epidemic. Some research points out that the virus is contained in droplets and can be spread when sneezing or coughing from those who have the symptoms, or through talking or even just breathing from asymptomatic carriers. Other researches have pointed out the possibility that the virus can linger suspended in the air for a few hours before it settles on the ground.

Whichever the case is, wearing general cloth masks may not provide you the needed protection against Coronavirus because it offers low protection barrier, no filtration properties and low fluid resistance as droplets can easily pass through it along with the viruses and bacteria. Furthermore, cloth masks don’t always fit properly, allowing tiny airborne particles to enter and exit the mask through the gaps.

Why Choose Our Medical Masks?

To ensure you have higher protection against COVID-19, use high-quality medical masks that offer:

Effective Filtration

Choose medical masks with high bacterial and viral filtration efficiency, preferably with more than 98% efficiency. This ensures dust, bacteria, virus, dust, smoke, pollen are do not enter your system.

Easy Breathing

High-quality medical masks do not make breathing difficult. Choose masks that offer three layers of protection but are still breathable and soft to prevent irritation when worn for hours.

Fluid Resistance

Masks that are fluid resistant prevent droplets and aerosols from penetrating the mask’s layers, thus, keeping you protected from diseases or prevents you from spreading harmful particles to others.

Adjustable Fit

Making sure your mask fits around your mouth and nose with no gaps ensures that you do not accidentally breathe in airborne particles. High-quality masks have adjustable nose bars and elastic ear loops that ensure a comfortable fit.

If you’re looking for high-quality medical masks to protect against bacteria and viruses, our ASTM Level 2 Face Mask and Disposable Face Mask are medical-grade and high-quality masks that offer all the benefits mentioned above.

Posted on Leave a comment

How do face masks protect you from COVID-19?

As the COVID-19/Coronavirus pandemic continues to spread throughout the world, a confusing topic continues to be the wearing of face masks. At the start of the pandemic, Dr. Theresa Tam, Canada’s chief public health officer, recommended that people who were not sick should not be wearing a mask. Now, however, Tam and Canada’s public health officials recommend non-medical face masks be worn in public when social distancing isn’t possible, and Prime Minister Justin Trudeau has said he will do just that. What’s changed? Is a mask really necessary?

Face Masks Protect Others From Coronavirus

A May 22 paper in the Annals of Internal Medicine took a close look at the effectiveness of masks in preventing the spread of disease. The results offer evidence that face masks can stop respiratory droplets from spreading. If someone wearing a face mask sneezes, the people around them are far better protected from potentially virus-bearing droplets than if there was no mask in place. “Every virus-laden particle retained in a mask is not available to hang in the air as an aerosol or fall to a surface to be later picked up by touch,” said researchers in the paper.

Do Face Masks Protect You from COVID-19?

Perhaps the most important thing to understand is how coronavirus, the virus that causes COVID-19, is passed from person to person. COVID-19 spreads primarily between people who are within about 6 feet (2 meters) of one another. It happens when one person produces respiratory droplets through a cough, sneeze, or talking, and another person inhales them. According to the U.S. Centers for Disease Control and Prevention (CDC), the virus spreads very easily between people, much more so than influenza.

The best way to prevent the spread of COVID-19 is to disinfect surfaces, practice frequent and thorough handwashing, and maintain social distance so those respiratory droplets can’t land on another person. But when social distancing isn’t possible, a face mask is the next best thing.

Cloth face masks are not designed to prevent the virus from permeating through to the wearer, and this may be why they have been the subject of so much controversy. Medical-grade face masks designed to filter particles in the air and protect the wearer are critical supplies that remain reserved for healthcare workers and first responders. Cloth face masks do prevent the spread of the disease, however, so in the long run, yes – they protect everyone.

In the briefing in which she recommended wearing masks, Dr. Tam noted people should see masks “as a way to protect other people – when two people are both wearing masks, they are protecting the other.” As children, we are taught to cover our mouths when we sneeze or cough – it prevents the spread of germs, and it’s the polite thing to do. Wearing a mask is simply the more advanced version of this – when the germs involved are much more dangerous and potentially deadly.

As we learn more about the coronavirus and head into summer, it becomes more evident that wearing a mask as an extra layer of protection is a wise move, as well as one that demonstrates a concern for fellow citizens. Handwashing remains essential and social distancing remains ideal, but as people grow tired of isolation and need to get out, face masks are important to protect ourselves and others from the spread of COVID-19.